CHNWP - ELMER'S CRAFT BOND TACKY GLUE, E430

  • MSDS: CHNWP
  • Manufacturer: BORDEN INC
  • Product Name: ELMER'S CRAFT BOND TACKY GLUE, E430
  • National Stock Number: 8040-00N088091
Product Identification

Product ID:ELMER'S CRAFT BOND TACKY GLUE, E430
MSDS Date:02/20/1996
FSC:8040
NIIN:00N088091
MSDS Number: CHNWP

Responsible Party
BORDEN INC
180 EAST BROAD ST
COLUMBUS, OH 43215
US

Emergency Phone: 614-431-6600

Info Phone: 614-431-6680

Cage: 07982

Contractor
BORDEN INC
208 COLUMBUS, OH 43215-3705 US

Telephone: 614-225-6124

Cage: 07982

Ingredients

NON-HAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN ABSORPTION: NO HAZS KNOWN
TO MFR. INGEST: NOT EXPECTED TO BE HARMFUL UNDER NORM CNDTNS OF
USE. INHAL: NOT EXPECTED TO BE HARMFUL UNDER NORM CNDTNS OF USE,
HOWEVER, IF ALLOWED TO BECOME AIR BORNE, MAY CAUSE IRRIT OF NOSE,
THROAT & LUNGS. SKIN/EYE CONT: MAY CAUSE IRRIT ON PRLNG/RPTD CONT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGESTION: IF ACCIDENTLY SWALLOWED, DILUTE BY DRINKING LARGE
QUANTITIES OF WATER. IMMEDIATELY CONTACT POISON CONTROL CENTER OR
HOSPITAL EMERGENCY ROOM FOR ANY OTHER ADDITIONAL TREATMENT
DIRECTIONS. IN HALATION: REMOVE TO FRESH AIR. SKIN: INCASE OF
IRRITATION, FLUSH WITH WATER. EYES: IMMEDIATELY FLUSH WITH PLENTY
OF WATER FOR AT LEAST 15 MINUTES. CALL MD IF IRRITATION PERSISTS.

Fire Fighting

Extinguishing Media:WILL NOT BURN UNLESS WATER HAS EVAPORATED. USE
MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . IN CASE OF FIRE, WATER SHOULD BE USED TO KEEP
FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:SOAK UP WITH ABSORBENT MATERIAL AND REMOVE TO
A CHEMICAL DISPOSAL AREA. PREVENT ENTRY INTO NATURAL BODIES OF
WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING. STORE IN A COOL,
DRY PLACE. KEEP CONTAINERS TIGHTLY CLOSED. AVOID PROLONGED OR
REPEATED BREATHING OF VAPOR.
Other Precautions:AVOID PROLONGED OR REPEATED CONTACT WITH SKIN AND
EYES. HANDLE IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE AND SAFETY
PRACTICES.

Exposure Controls

Respiratory Protection:WHERE AIR CONTAMINANTS CAN EXCEED ACCEPTABLE
CRITERIA, USE NIOSH APPROVED RESP PROT EQUIPMENT. RESPS SHOULD BE
SELECTED BASED ON FORM & CONCENTRATION OF CONTAMINANTS IN AIR I/A/W
OSHA 29 CFR 1910.134/ OTHER APPLICABLE STANDARDS/GUIDELINES.
Ventilation:IF AIRBORNE CONTAMINANTS ARE GENERATED WHEN MATL IS
HEATED/HANDLED, SUFFICIENT VENT IN VOL & AIR FLOW PATTERNS (SUP
DAT)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT: SHOULD BE PROVIDED TO KEEP AIR CONTAMINANT CONC LEVELS BELOW
ACCEPTABLE CRITERIA.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17.5 @ 20C
Vapor Density:<1
Spec Gravity:1.07
pH:5.1
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:DISPERSIBLE
Appearance and Odor:MILKY WHITE GET WITH MILD ACETIC AROMA
Percent Volatiles by Volume:48

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALINE MATERIALS.
Stability Condition to Avoid:NORMALLY STABLE AS DEFINED IN NFPA 704-12
(4-3.1).
Hazardous Decomposition Products:DECOMPOSITION PRODUCTS MAY INCLUDE
CARBON MONOXIDE AND CARBON DIOXIDE.

Disposal

Waste Disposal Methods:RECOVER FREE LIQUID. ABSORB RESIDUE AND DISPOSE
OF ACCORDING TO LOCAL, STATE, AND FEDERAL REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.